Product details
The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with a computer to surf the Internet or attach it onto Raspberry Pi to enable functions like 4G high-speed connection, wireless communication, making telephone calls, sending SMS, global positioning, etc.
The SIM7600G-H 4G HAT supports telephoto calls and sending SMS by AT Commands using an onboard audio jack.
![Sim7600G-H 4G Hat For Raspberry Pi, Sim7600G-H 4G Hat , Sim7600G-H , 4G Hat Waveshare Waveshare Sim7600G H 4G Hat For Raspberry Pi Lte Cat 4 4G 3G 2G Support 1 Waveshare Sim7600G-H 4G Hat For Raspberry Pi, Lte Cat-4 4G 3G 2G Support](https://robu.in/wp-content/uploads/2021/04/Waveshare-SIM7600G-H-4G-HAT-For-Raspberry-Pi-LTE-Cat-4-4G-3G-2G-Support-1.png)
Based on cloud communication it supports TCP/UDP/FTP/FTPS/HTTP/HTTPS communication protocol.
![Sim7600G-H 4G Hat For Raspberry Pi, Sim7600G-H 4G Hat , Sim7600G-H , 4G Hat Waveshare Waveshare Sim7600G H 4G Hat For Raspberry Pi Lte Cat 4 4G 3G 2G Support 1 Waveshare Sim7600G-H 4G Hat For Raspberry Pi, Lte Cat-4 4G 3G 2G Support](https://robu.in/wp-content/uploads/2021/04/Waveshare-SIM7600G-H-4G-HAT-For-Raspberry-Pi-LTE-Cat-4-4G-3G-2G-Support-1.jpg)
Features:Â
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making a telephone call
- 2x LED indicators, easy to monitor the operating status
- Onboard voltage translator, the operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Note: the Raspberry Pi in the photo is NOT included.