Home /   Categories /   Arduino Modules  /   Capacitive Sixteen point Touch Module based on TTP229
  • Capacitive Sixteen point Touch Module based on TTP229
  • Capacitive Sixteen point Touch Module based on TTP229
  • Capacitive Sixteen point Touch Module based on TTP229

Capacitive Sixteen point Touch Module based on TTP229

Per piece

badge
badge
badge
Product details
  1. Operating voltage2.4V~5.5V
  2. Built-in regulator
  3. 8 Key or 16 key modes
  4. Separate outputs to 8 keys in 8 key mode
  5. 2 wires serial output interface for both 16 key and 8 key mode
  6. Outputs can be set to CMOS/OD/OC with active high/low
  7. 2 Wires serial interface can select active high or low by option
  8. Optional Multi-key or single-key
  9. Provides two kinds of sampling rate: slow sampling rate 8Hz and fast sampling rate 64Hz at sleep mode
  10. Optional maximum key-on time about 80sec
  11. Auto calibration at power up (keypad must not be touched for 0.5 seconds after power up)
  12. Auto calibration for changes in environment

 

  • This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate sensing of up to 16 points. Using this keypad provides a solid state alternative to mechanical type keypads providing the advantage of greater durability especially in dusty environments. They keypad can also be configured in different modes providing various key group options upto 16 independent keys. Outs 1 to 8 on the header connector mimic the sates of the first 8 keys. When is 16 key mode the state of all 16 keys can be read via its 2 wire serial interface.


 


Similar products