100k NTC Thermistor With Copper Tip for MK8 Extruder

Quick Overview:

1. Temperature range of use: −40°C to 270°C.
2. Dissipation power factor: ≥5 mW/℃ (static in the air).
3. 100k Ohm NTC Thermistor.
4. NTC Thin Film Thermistor Cable.
5. Max power rating: 45 mW
6. The hot time constant: ≤7 s(in the air)

Product Description:

         This is Thermistor 100k NTC with 1 Meter Cable Temperature Sensor for 3D Printer Reprap. The thermistor is a thermally sensitive resistor known for exhibiting a large change in resistance with only a small change in temperature.

        The thermistor comes with a copper tip, make the temperature control more accurately, it will have a better thermal transfer and solve the problem for thermistor fixed unstable and the problem of easy damage

        In 3D printers, the temperature and fine-tuning of printers are very important, as print quality can be greatly reduced if the temperature is not set correctly. The thermistor, a temperature sensor capable of withstanding temperatures above 200 degrees Celsius, is used to fine-tune the nozzle’s temperature and heat the device. In most RepRaps, a thermistor senses the temperature of the Hot End. A second thermistor senses the temperature of the Heated Bed.